But at least I was able to get it working. I've had similar problems with Core installs after version 11.1 and was forced to use the bootable DVD method to get it installed. I have no doubt that my production server will upgrade without a problem, but considering all the problems I have had trying to upgrade my dev server, I don't dare even try upgrading my prod server for fear it will fail miserably. But my Xeon server sits idle for most of the time and I would like to use the virtualization features offered in Scale as they appear to be much more usable than the bhyv in Core. Granted, for what I use TrueNAS for, version 12.0-U8.1 certainly satisfies my needs (file server, media server and backup server). This time at least the system was able to boot, but then the screen went blank (I left it for an hour) and never came back! I have tried installing TrueNAS Scale as an upgrade to my TrueNAS Core system by first upgrading to version the Core system to 12.0-U3.1 and then when that completed (without issue), selecting the Scale 22.12.0 train, and then upgrading again. The DVD boots, I answer the questions, the installation appears to work correctly, but when it's time to boot the new server, it fails with the "No bootable device" message. I've even gone so far as to create a bootable DVD of TrueNAS Scale, with exactly the same results as above. Nothing I can do will get this computer to boot. I'm always left with the message " No bootable device - insert boot disk and press any key". Finally after the install has been complete and I'm asked to remove the boot media and reboot the system, I do so, but the system never, ever boots. I then go through the TrueNAS Scale questions (select device where to install, Admin password etc) and everything appears to go well. As long as I have written the USB in ISO mode, the USB boots fine. ISO mode boots where as DD mode does NOT boot!! I've tried writing using both ISO mode and DD mode. So I download the ISO and using Rufus, copied it to a 16GB USB stick using an MBR partition scheme and a BIOS or UEFI Target System mode. Now what I want to do is test TrueNAS Scale. However I also use it to test updates before updating the primary server.Įnough said about that. Once synchronization has complete, the system is then shutdown for another week. I mostly use this second server as a data backup of my primary server by booting it once a week, then synchronizing all the data files from the primary server to the secondary server. The first is my "production" server which is a true server (ASUS P11-C/M4L motherboard, Xeon E-2236 CPU, 64GB ECC memory, 4x4TB Seagate IronWolf drives) and the second is my backup/test server which is not a true server (Intel consumer motherboard, Core2-Duo cpu and 8GB memory, 3x3TB Seagate IronWolf drives). I have two systems running TrueNAS Core 12.0.U8.1. I need a way that they can download a single file from the web which when run will prompt them to insert a USB stick, and then burn the bootable USB image to it.Why oh why cannot I not get TrueNAS Scale 22.12.0 installed on my old test system. However, having to use a tool like Rufus will freak them out. The logistics of getting the physical USB drives around the world is a nightmare though - much better if we can provide somewhere the users (employees) can download them. Our best fix option is to get USB flash drives to them, as we have streamlined our rollout process to be basically self configuring for the users. The fix for this is to switch them to AHCI, but this means we need to redeploy the image to our users (who may or may not be based in offices, and are spread all over the world). (They are bluescreening regularly with an error with the iAstorA.sys driver.) The laptops were shipped by the manufacturer with an incorrect BIOS setting (SATA operations set to Raid rather than AHCI) which means that some recent driver updates from the manufacturer has rendered them unstable. I am an IT professional and we have just rolled out 250 or so laptops to our offices around the world. OK - a bit more information to confirm this is on topic. Is there a tool I can use that is safe and will create an exe which users can run to download and burn to a bootable USB? I've seen some posts suggesting WinToFlash's Boot Replicator ( ) but the site flags up as malicious. My ideal is for something like the Windows 10 Media Creator ( ). They aren't especially technical, so I don't want them to have to download any other software (e.g. I need to put a bootable image of a usb stick on a website so that our users can download it and burn it to USB themselves.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |